ES-
ES-
top bar
ES-

You are here: Home / Company / News

News

December 2021 Advent greetings ✨

The year 2021 is drawing to a close. This year, too, was dominated by the ongoing Corona pandemic.
mehr

November 2021 Milling with robots

Milling with industrial robots is a cost-effective alternative for machining tasks where the accuracy of a robot is sufficient.
mehr

November 2021 Aluminium recycling 💡 🌏 ♻️

Especially in times of raw material scarcity, the recycling of metals is becoming even more important.
mehr

November 2021 📣🎓 Study Info Day 17.11.2021 – We’re there!

Are you interested in a dual study programme in the field of electrical engineering / automation? Great 🎉! We offer a dual study place every year and are your reliable partner during the practical phase!
mehr

November 2021 New video 🎥 Drilling with robot

Drilling with robots is a cost-efficient solution compared to a machining centre. Not all holes have the highest requirements for positional accuracy and roundness.
mehr

October 2021 Finally, a trade fair again 🤗

Last Wednesday, we were at the AIM in Aalen and provided information about our study programmes.
mehr

October 2021 Study start at Mössner🎓

October at Mössner is all about studying 📚.
mehr

October 2021 Our solutions for aluminium industry

For the aluminium industry, we offer worldwide solutions for sawing, milling, testing, marking, handling and automation.
mehr

September 2021 New HPDC Project at Ljunghäll in Schweden 👏

The high demand for quality and reliability perfectly unites the common values of Ljunghäll Light Metalls Division and Mössner.
mehr

September 2021 Mössner Top Team🎾

Our top tennis team participated in the famous “Eschach Open” last weekend.
mehr

September 2021 Automation solution for steel cuts – Bin Picking

Your workpieces are unsorted in boxes? 📦 The workpieces have to be removed troublesome by hand? Then we have the ideal solution for you!
mehr

September 2021 Automated DMC laser marking for castings 💥

Laser marking is an important process step to ensure traceability and component identification in the production process.
mehr

August 2021 📹 New video: Exclusive insight into a raw part finishing line

Our raw part casting line for V6 engine blocks efficiently removes burrs and casting systems.
mehr

August 2021 Processing station for round materials

Our processing machines for round materials such as tubes or round rods enable a wide range of production steps.
mehr

August 2021 Mössner RoboBro 🤖

With RoboBro you automate existing processes and machining steps. As a result, you are always one step ahead economically.
mehr

July 2021 Ergonomic & time-saving handling solution for steel traders

Do you still palletise and commission your saw cuttings manually?
mehr

July 2021 🎾 Facilities for top performance

We are pleased to be the court sponsor of TV Eschach’s tennis court number 4 for the second year already.
mehr

July 2021 New Brochure Steel and Metal Bandsaw Machines Mössner REKORD

New brochure steel and metal band machines – our classic since 1898.
mehr

July 2021 Handling solution for steel 💪

Heavy handling tasks are particularly common in steel processing companies.
mehr

July 2021 Start of the vaccination campaign at Mössner

In cooperation with BAD GmbH, our partner in occupational health and safety, Mössner employees had the opportunity to be vaccinated against COVID-19 by the company doctor last Friday.
mehr

July 2021 Attention students 😃

Practical semesters, working student jobs and final theses – we have many new offers for students.
mehr

June 2021 Our new aluminium section is online

🎊We are very pleased to present the new aluminium section on our homepage.
mehr

June 2021 New project at Mössner 🙌

Another new project is starting at our company.
mehr

June 2021 De-powdering – finishing – cutting

We have the station for finishing your 3D printed workpieces. Our de-powdering station is compact, quick to clean and easy to set up.
mehr

June 2021 Special machinery worldwide

🗺️ 📍Whether locally or worldwide. With our special machines you get the right solution for your tasks!
mehr

June 2021 Robotic circular saws

💡Removing sprue systems with saws is the fastest and most efficient way to separate them from the casting. Circular saws and bandsaws are the perfect combination for a wide range of cutting tasks. Our flexible...
mehr

June 2021 🔌Electric mobility is on the rise

We have been offering products and systems for the processing of e-motor housings for a long time. Now we have also taken a further step and added e-cars to our vehicle fleet.
mehr

June 2021 High-performance band saws for billet production

Sawing aluminium extrusion billets in various diameters quickly and precisely with our high-performance band saws for billet production.
mehr

June 2021 🙌🏻 New projects with ABB robots

We received a total of five new ABB robots today. The commissioning of the robot systems and the associated plant technology will take place in the next few weeks at our plant in Eschach.
mehr

May 2021 🎉1.000 Follower on LinkedIn

Wow, more than 1000 followers on LinkedIn!
mehr

May 2021 2D Vision Systems

Image capturing and evalua­tion of 2D and 3D images have become indispen­sable in modern production – from de-palletising of components and the alignment of the work­piece at processing stations, to automatic optical inspections (AOI).
mehr

May 2021 De-powdering station for Post-processing of 3D printed workpieces

De-powdering – finishing – cutting are your tasks? We offer solutions for the post-processing of your 3D printed workpieces.
mehr

May 2021 Mössner is carbon neutral! 🍃 🌱

Today, we are pleased to give you a small insight into our climate protection project, the hydropower project “Félou Regional Hydropower” in Mali!
mehr

May 2021 Save the date! Our online presentation on May 18th, 2021: Advantages of our deburring and milling processes

EUROGUSS Mexico Virtual Weeks: We are going into the second round on May 18th, 2021.
mehr

May 2021 A new project for a customer in Mexico

A new project for a customer in Mexico is coming up again.
mehr

May 2021 Presentation: HPDC automation solutions by Mössner

📣Today we present our solutions for HPDC automation at the Virtual Weeks Euroguss Mexico!
mehr

April 2021 Sneak peek on our new bin picking project 📦

🔍How do you use a robot to remove workpieces that are unsorted in a crate?
mehr

April 2021 Countdown zu den EUROGUSS MEXICO Virtual Weeks 2021

💻 In einer Woche beginnen die EUROGUSS MEXICO Virtual Weeks 2021!
mehr

April 2021 Hydraulic driven deburring tool

 Today we would like to introduce our hydraulic driven deburring tool..
mehr

April 2021 Robot bandsaw machines

💡💯Removing sprue systems with saws is the fastest and most efficient way to separate them from the casting.
mehr

April 2021 Aluminium bandsaw technology for the sawing of rolling ingots, T-bars and cast billets

With a Mössner sawing system, a wide variety of ingots can be sawn quickly, precisely, with a small cutting gap and thus low chip accumulation and low energy consumption, into any programmable sections.
mehr

April 2021 Corona self-test at Mössner

The Corona pandemic is currently one of the greatest tests for us all.
mehr

April 2021 Vision Sensors

Image capturing and evalua­tion of 2D and 3D images have become indispen­sable in modern production – from de-palletising of components and the alignment of the work­piece at processing stations, to automatic optical inspections (AOI).
mehr

April 2021 Circular saw station for machining chassis parts

Our circular saws with NC axes carry out the feed movements directly on the machine.
mehr

April 2021 Happy Easter 🌷!

We wish you a happy Easter and sunny spring days!
mehr

March 2021 🎥 Video: Modular robot processing cell

With our decades of experience in robot-guided processing, with our Mössner FlexCube we provide a flexible processing cell as a cost-effective alternative to a CNC machine.
mehr

March 2021 🎥 Video: Finishing line for cylinder heads handling, deburring, milling

In addition to handling tasks, our post-processing line for cylinder heads takes care of fettling, deburring and machining the inlet side, outlet side and chain case.
mehr

March 2021 Insight in our own production

Our own production allows us to manufacture urgently needed workpieces quickly and flexibly.
mehr

March 2021 Video: 👉💪Bandsaw machine for cutting aluminium plates

We supply turnkey solutions for the fully automated aluminium plate production.
mehr

March 2021 Machining spindles

Our processing spindles are ideal for machining aluminium and grey cast iron parts, cylinder heads, engine blocks, structural parts and chassis parts.
mehr

March 2021 Video: Multi-axis bandsaws

Removing sprue systems with saws is the fastest and most efficient way to separate them from the casting.
mehr

March 2021 🎓Digital training fair StartIT on 12.03.2021

You are graduating next year and have no idea what to do next? The StartIt training fair Schwäbisch Gmünd informs this year digitally about the training opportunities in the region. MÖSSNER will also be there!
mehr

March 2021 Image processing 2D Measuring Systems

Image capturing and evalua­tion of 2D and 3D images have become indispen­sable in modern production – from de-palletising of components and the alignment of the work­piece at processing stations, to automatic optical inspections (AOI).
mehr

March 2021 ▶️🎥 New video about contour saws

The Mössner bandsaw machines for contoured cuts can be controlled numerically (X axis) and can be rotated numerically about the saw cut line (C axis).
mehr

February 2021 Update: Project for chassis parts

There is news again from our project chassis parts.
mehr

February 2021 A look at our band saw machines

Removing sprue systems with saws is the fastest and most efficient way to separate them from the casting.
mehr

February 2021 Video: Bandsaw for aluminium-billets

Extruded profiles are produced by the so-called extrusion process. The starting material for this is aluminium extrusion ingots, so-called billets.
mehr

February 2021 Happy Chinese New Year 2021!

We sincerely wish all our Chinese customers, partners, and colleagues a happy new year of the Ox! 🐂!
mehr

February 2021 Special sawing system for the production of protective foil

We develop special sawing systems and automation solutions for the production of protective foil.
mehr

February 2021 Short update about our ongoing project 🔧💪🏻

With a cycle time of 57 seconds, wheel brackets are cut and deburred in this system. A robot takes over the handling of the workpieces.
mehr

February 2021 💡Decoring with Mössner 3-1 decoring machine

We are true professionals at core removing. When it comes to efficiently removing cores, core residues or moulding sand, we have coring solutions for all needs.
mehr

January 2021 New project in the field of chassis technology

Today we received three KUKA robots for a new project in the field of chassis technology.
mehr

January 2021 👋🏻 Many greetings from snow-covered Eschach

We enjoy the view of beautiful sunrises and the winter landscape as well.
mehr

January 2021 💡Decoring with Mössner -Vibration stations

We are true professionals in the matter of decoring. When it comes to efficiently removing cores, core residues or moulding sand, we have coring solutions for all needs.
mehr

January 2021 Small meets big

Hello and welcome 2021 👋 We wish everyone a happy new year! 🍀
mehr

November 2020 Video: Mössner Aluminiumtechnology

Almost everyone has held an aluminum beverage can in their hand at some time. What does Mössner have to do with it?
mehr

November 2020 OCR- DMC Station

With the 3D image processing system, the reading of OCR characters is no longer an obstacle. Even scriptures starting at a height of 1,3 mm are no problem.
mehr

November 2020 🎥Video: LPDC automation

New video about LPDC automation, casting cell, core handling and marking is online.
mehr

November 2020 Video: 🎥 LPDC-Automation

A new video about LPDC automation, casting cell, core handling and marking is online.
mehr

October 2020 Mössner Milling spindles

Our solid machining spindles and circular saws are essential components for successful processing of castings.
mehr

October 2020 🎊 A special “wedding” at Mössner

Oberteil- trifft Unterteil – eine spezielle „Hochzeit“ fand bei uns statt.
mehr

October 2020 Mössner Robot bandsaws

Removing sprue systems with bandsaws is the fastest and most efficient way to separate them from the casting. Maximum flexibility is provided by our robot band saws which are optimised specifically for the use with...
mehr

October 2020 We keep up the tension

Steel, guide rails and hydraulic cylinders – we literally keep the tension up.
mehr

October 2020 Video: Milling process

Milling with industrial robots is a cost-effective alternative for machining tasks where the accuracy of a robot is sufficient.
mehr

October 2020 Remote support

Installations in times of a pandemic are more challenging than ever.Our employees are still on site for our customers in Mexico, Poland, Northern Ireland and throughout Germany.
mehr

August 2020 We are on YouTube!

Have you seen our latest video simulation about sawing aluminium bars? We can do much more and are happy to present our new YouTube channel 🎉.
mehr

July 2020 – New brochure Steel and metall bandsaw machines Mössner REKORD

Our new Steel and metall bandsaw machine Mössner REKORD brochures are available.
mehr

January 2020 – Review Official opening of new plant of Fagor Erderlan at Bergara

On the 18th of November Fagor Ederlan held the official opening event of its new plant in the city of Bergara, a small city between Bilbao and San Sebastian, dedicated to the production of aluminium...
mehr

December 2019 – To have values. To create values.

The last years have been characterised by growth, technological innovations and the competition for good personnel. We took advantage of our opportunities and created a good position for the future.
mehr

November 2019 – Service in a new dimension

Standstill is not an option in times of turbulence. That is why our service has more than one dimension. And it offers more than one solution. It offers competent employees, various ways of action and...
mehr

June 2019 – After the Gifa: new solutions at the start

As well in this year, it has been shown again, that the GIFA is the most important international industry event in the field of casting. And it is important to be present and to be...
mehr

December 2018 – New Year´s greetings

Looking back – the year 2018 was again very versatile, exciting and challenging. Despite much insecurity in the markets, we were successful throughout the whole year, due to the overall good economy and innovative products.
mehr

July 2018 – New brochure Steel and metall bandsaw machines Mössner REKORD

Our new Steel and metall bandsaw machine Mössner REKORD brochures are available.
mehr

June 2018 – Successful technician theses at Mössner

At the special purpose machinery manufacturer Mössner, six prospective technicians are engaged with the subject Industry 4.0 and the progress in the range of 3D prints of metals. Currently, they are trained to become certified...
mehr